How to DIY Chevron Table under $150
Since my last project, the wife and I have opened our own business doing marketing and branding. The building we chose to put our office in is an older warehouse converted into offices and is near the train tracks in our city. As this is a new business my wife has decided that we should build a lot of the furniture ourselves and the designs should be rustic in style. We decided to build a chevron table using some legs from an older office table we had that broke. This project took limited tools and money to make and added some extra character to the conference room area. Let’s start off with the tools and wood we will need.
MATERIALS AND TOOLS
The wood purchased and cuts needed in this post are for a six foot by three-foot table. You may need to adjust accordingly if you decide to go with a different size.
When it comes to the tools needed for this table it’s quite simple. All you will need for this table is a good drill with a bit for drilling pilot holes and one for screws, a miter saw, sander, hammer and Terry cloths for the stain.
PREPARATION AND ASSEMBLY
To start off the table you need to form the frame of it. For this, you will need to cut two 6 foot 2×4’s and two 3 foot 2×4’s with a 45-degree angle on both ends. Use the screws to hold them together making sure you drill pilot holes so the boards stay even when put together. Once the sides are together cut four 13 inch long 2×4’s with 45-degree end cuts. Place the cut pieces into a row within the border of the table and mark where the ends meet, you will need to place 2×4 beams longways inside of the frame so the chevrons can sit on them for support.
After the beams are placed cut the rest of the 13-inch chevrons (There were roughly 60 altogether) and begin to place them on the support beams. It is important to dry fit them into the table to ensure a proper fit. When all of the 13-inch pieces are in place you can cut the pieces to place at the small gaps at the ends of the table. After all of your pieces are dry fit and looks even you can begin nailing them in.
SMOOTHING AND STAINING
Once everything is assembled give the tops and edges a good sanding. Now it’s time to stain/paint it, this all depends on your preference. We decided to go with an alternating pattern of Dark Walnut and Cherry stains.
I placed some painters tape over the patterns that were going to be stained in cherry first and stained the rest with the Dark Walnut to include the framing. For the staining, I used brushes and Terry Towels to apply it and wipe it off. When the Dark Walnut was finished drying I taped it off and stained the Cherry sections.
Once the stain was finished drying we added the legs to the table with screws.
The optional part of this is the glass top. This helps stabilize the table top and in my opinion, makes the table look more finished.
If you try this project please let me know how it turns out. I’m interested to see how your tables turned out.